Our Work
New York Fitness Centers
- 2007designing and equipping fitness facilities since
- 30,000+commercial orders delivered
- 500+cities served
- 50+manufacturer partners
Installed in New York
Commercial Fitness Facilities We Have Equipped in New York
Projects here run the same way they do anywhere: the room is measured and drawn to scale first, the equipment list follows from the layout, and delivery and installation are managed rather than left as a freight drop-off. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
On the Install
3 photos
2 photos
2 photos
Markets we have equipped in New York
Hauppauge, Saranac, Buffalo, White Plains and Garden City. Facilities in the communities around them are served from the same projects, so it is worth asking even if your market is not named here.
How a project runs, from drawing to installed room
-
The room is drawn before it is quoted
A layout to scale comes first, with ADA clearances, floor loading and power planned into it. Most of the work here is in apartment and condominium communities, schools and campus recreation, and the equipment list follows from the room rather than the other way round.
-
One order, several manufacturers
Cardio, strength, flooring and accessories rarely come from one brand. We consolidate them into a single order and a single delivery date, so the room lands together.
-
Managed installation, wherever it is
Equipment is assembled, placed to the approved layout and function-tested on site by crews we manage or installers we work with — never a bare freight drop-off.
The facilities we equip in New York
Apartment and condominium amenity rooms
An amenity room tucked into an alcove or a clubhouse corner plays by different numbers, and the difference usually costs a machine. ADA requires a 30 by 48 in clear floor space for at least one of each TYPE of machine — but 36 by 48 in where that space is enclosed on three sides. With ACSM’s 25 to 50 sq ft per station already setting the overall count, that extra six inches in an enclosed bay is frequently what decides whether the last piece fits. Worth settling on the plan rather than on the delivery day. More on apartment and condominium amenity rooms.
School and campus recreation
A campus weight room takes harder use than almost anything else we equip, and it takes it from people who are being coached to lift heavy. That makes both the structure and the surface safety items rather than budget items. IBC Table 1607.1 designs fitness areas for a 100 psf live load, which matters most when a strength room goes into an existing building. ASTM F2772 then covers the floor as measured properties — force reduction, vertical deformation, ball bounce and surface friction — which is what a platform area actually needs written into the specification. More on school and campus recreation.
The rest of what we equip there
Those two are what New York orders most, not the limit of what we supply there. The same design, flooring, delivery and installation work covers every other facility type:
- fire, police and municipal recreation
- YMCAs and nonprofits
- home and private training rooms
- student housing
- HOA and property management
- corporate fitness centers
- health clubs and training studios
- hotel and resort fitness rooms
- senior living communities
- medical and rehabilitation clinics
What decides the room before the equipment list
Access, doors and circulation
Getting equipment into a room is a survey item, not an assumption. ADA sets a 32 in minimum clear door opening, measured between the face of the door and the stop with the door open 90 degrees, rising to 36 in where the opening is deeper than 24 in, with a 36 in minimum clear route width and a 60 in diameter circular turning space. A nominal 3 ft leaf does not yield 36 in, which is the detail that catches renovations.
Circulation, and the space nobody budgets for
Rooms fail on circulation far more often than on equipment selection. ADA sets a 60 in diameter circular turning space and a 36 in minimum clear width on the accessible route, and in a room of 400 to 600 sq ft those two dimensions decide how many machines can face which way. Reserving them on the drawing costs nothing; recovering them after delivery usually means sending a piece back.
Replacing a room that already exists
Most projects are not empty rooms. Where equipment is being replaced we can appraise, buy back and remove what is there, which changes the arithmetic on the new floor and removes the disposal problem — a loaded selectorized stack is not something a property manager wants to arrange a truck for. Planning the swap also matters to residents and members: a room that is out of service for an unplanned week is the complaint that follows the project around.
We handle design, equipment and installation as one scope
Design and layout
A layout drawn to scale before an equipment list exists, with ADA clearances, floor loading and power planned into it.
Equipment and flooring
Cardio, strength and functional equipment from several manufacturers, plus flooring and mirrors, consolidated into one order and one delivery date.
Installation and after
Delivery, installation and function testing, then finance options, extended warranties and maintenance once the room is open.
In short
Fit Supply has designed, supplied and installed commercial fitness facilities in New York including Hauppauge, Saranac, Buffalo and White Plains. Work there runs to apartment and condominium communities, schools and campus recreation, home and individual customers. Delivery and installation are managed by us end to end rather than left as a freight drop-off, across 500+ cities.
Common questions about New York projects
Does Fit Supply work in New York?
Yes. We have supplied and installed commercial fitness facilities in New York, including Hauppauge, Saranac, Buffalo, White Plains and Garden City. Facilities in surrounding communities are served from the same projects, so it is worth asking even if your market is not named. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
Does an alcove or recessed bay change the clearance we need?
Yes. ADA requires a 30 by 48 in clear floor space for at least one of each TYPE of machine, but where that space is enclosed on three sides it becomes 36 by 48 in. In an alcove layout that difference frequently decides whether the last piece fits, which is a reason to settle the plan before the order.
What does a school weight room need that a general gym does not?
Higher tolerance on both the floor and the equipment. IBC Table 1607.1 designs fitness areas for a 100 psf live load, which is a real constraint when a strength room goes into an existing building. ASTM F2772 covers floor performance as measured properties, and a lifting platform area asks for different values than the rest of the room.
Do you keep title to the equipment until it is paid for?
Yes. Title remains with Fit Supply until we are paid in full, and our terms grant a purchase-money security interest under the Uniform Commercial Code in the products and their proceeds. In normal circumstances no buyer ever encounters this — it exists so that unpaid equipment does not simply become someone else’s asset, and it is a standard protection for a supplier who orders equipment against a deposit. It does not affect your use of the equipment once the invoice is settled.
Is there a minimum order?
No. Fit Supply will sell a single set of dumbbells, one treadmill, or an entire facility. There is no minimum order value and no requirement to buy a package.