Our Work
Missouri Fitness Centers
- 2007designing and equipping fitness facilities since
- 30,000+commercial orders delivered
- 500+cities served
- 50+manufacturer partners
Installed by Fit Supply
Commercial Fitness Facilities We Have Equipped in Missouri
Projects here run the same way they do anywhere: the room is measured and drawn to scale first, the equipment list follows from the layout, and delivery and installation are managed rather than left as a freight drop-off. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
Markets we have equipped in Missouri
St. Louis, Licking, Eureka, Kansas City and Ballwin. Facilities in the communities around them are served from the same projects, so it is worth asking even if your market is not named here.
How a project runs, from drawing to installed room
-
The room is drawn before it is quoted
A layout to scale comes first, with ADA clearances, floor loading and power planned into it. Most of the work here is in apartment and condominium communities, health clubs and gyms, and the equipment list follows from the room rather than the other way round.
-
One order, several manufacturers
Cardio, strength, flooring and accessories rarely come from one brand. We consolidate them into a single order and a single delivery date, so the room lands together.
-
Managed installation, wherever it is
Equipment is assembled, placed to the approved layout and function-tested on site by crews we manage or installers we work with — never a bare freight drop-off.
One scope, one team A layout drawn to scale before an equipment list exists, with ADA clearances, floor loading and power planned into it. Cardio, strength and functional equipment from several manufacturers, plus flooring and mirrors, consolidated into one order and one delivery date. Delivery, installation and function testing, then finance options, extended warranties and maintenance once the room is open.Design, equipment and installation as one scope
Design and layout
Equipment and flooring
Installation and after
The facilities we equip in Missouri
Apartment and condominium amenity rooms
Putting a gym into a room that was drawn as apartments is the one decision that can move a schedule by months, and it is worth settling in week one. A fitness floor is designed for more than twice the load of living space — IBC Table 1607.1 puts fitness areas at 100 psf against 40 psf for residential areas outside sleeping rooms — so converting existing space upstairs is a change of use your structural engineer has to sign off. We ask that question before we quote equipment, because finding it at delivery is what turns a two-week install into a two-month one. More on apartment gym equipment and design.
Health clubs and training studios
Accessibility is easier to achieve than most operators expect and almost impossible to retrofit, which is the case for drawing the floor first. ADA asks for a 30 by 48 in clear floor space on at least one of each TYPE of machine, served by an accessible route — 36 by 48 in where that space is enclosed on three sides. The part that makes it workable on a dense floor is that the clear space may overlap the route and sit in the aisle behind the machine. Planned in, it costs nothing. Discovered later, it costs a piece of equipment. More on equipping health clubs and training studios.
The rest of what we equip there
Those two are what Missouri orders most, not the limit of what we supply there. The same design, flooring, delivery and installation work covers every other facility type:
- student housing gyms
- HOA and property-managed gyms
- corporate fitness centers
- hotel and resort fitness rooms
- senior living fitness rooms
- medical and rehab training rooms
- schools and campus recreation
- fire, police and municipal gyms
- correctional facility fitness rooms
- YMCA and nonprofit gyms
- home and private training rooms
What decides the room before the equipment list
Flooring is a measured property, not a finish
ASTM F2772 is the standard specification for the athletic performance properties of indoor sports floor systems, covering force reduction, vertical deformation, ball bounce and surface friction as MEASURED values. A free-weight drop area, a turf lane and a group studio ask different things of the build-up, so specifying by zone usually costs less than taking the heaviest specification across the whole room — and in multifamily and hospitality it is a noise decision as much as a durability one.
Circulation, and the space nobody budgets for
Rooms fail on circulation far more often than on equipment selection. ADA sets a 60 in diameter circular turning space and a 36 in minimum clear width on the accessible route, and in a room of 400 to 600 sq ft those two dimensions decide how many machines can face which way. Reserving them on the drawing costs nothing; recovering them after delivery usually means sending a piece back.
Designing for the peak, not the average
Usage is not evenly distributed, and the shape of the peak differs by facility type — a corporate room concentrates before work, at lunch and immediately after; student housing loads into a narrow evening window; a fire or police station is used across every shift and never really recovers. ACSM allows 25 to 50 sq ft per station, so the real decision is which pieces to duplicate rather than how many categories to cover. Breadth that sits idle is a poor trade against depth on whatever actually queues.
In short
Commercial fitness facilities in Missouri including St. Louis, Licking, Eureka and Kansas City have been designed, supplied and installed by Fit Supply. Work there runs to apartment and condominium communities, health clubs and gyms, home and individual customers. The room is drawn to scale before any equipment is quoted, with the ADA clear floor space of 30 by 48 inches planned in rather than discovered.
Common questions about Missouri projects
Does Fit Supply work in Missouri?
Yes. We have supplied and installed commercial fitness facilities in Missouri, including St. Louis, Licking, Eureka, Kansas City and Ballwin. Facilities in surrounding communities are served from the same projects, so it is worth asking even if your market is not named. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
Can a fitness room go on an upper floor of an apartment building?
Often, but it is a structural question first. IBC Table 1607.1 designs fitness areas for a 100 psf live load and residential areas outside sleeping rooms for 40 psf, so converting residential space is a change of use. Your structural engineer confirms what the existing framing carries; we plan the layout around that answer, including where the heaviest racks and plate storage sit.
How do we make the floor work for beginners and athletes together?
By specifying part of it deliberately for inclusive use rather than assuming one range of equipment serves everyone. ASTM F3021 is the standard specification for universal design of fitness equipment for inclusive use by people with functional limitations and impairments, and it is the reference for those selections. Layout does the rest, by separating the zones that need different pacing.
What equipment brands do you carry?
Fit Supply carries a broad range of commercial equipment brands rather than any one house line. The mix on a project is matched to what that facility actually needs — budget, feature set and space — with particularly wide options in specialty categories like recovery. No manufacturer is favored over another; the room decides.
How long does installation take?
It varies enough by job that a site survey is the only honest answer. What drives it is access rather than piece count: door widths, elevator availability, stairs, tight or turning hallways, and whether equipment can come in assembled or has to be taken apart and rebuilt in the room. Two identical equipment lists in two different buildings can be a day apart. We assess it on the survey and tell you before the schedule is set.