Our Work
Michigan Fitness Centers
- 2007designing and equipping fitness facilities since
- 30,000+commercial orders delivered
- 500+cities served
- 50+manufacturer partners
Installed in Michigan
5 photos
Commercial Fitness Facilities We Have Equipped in Michigan
Projects here run the same way they do anywhere: the room is measured and drawn to scale first, the equipment list follows from the layout, and delivery and installation are managed rather than left as a freight drop-off. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
On the Install
3 photos
Coverage in Michigan
Michigan is covered from our Texas and Arizona locations. Tell us the property and the facility type and we will confirm what we can do there — see every facility type we equip.
How a project runs, from drawing to installed room
-
The room is drawn before it is quoted
A layout to scale comes first, with ADA clearances, floor loading and power planned into it. Most of the work here is in home and individual customers, apartment and condominium communities, and the equipment list follows from the room rather than the other way round.
-
One order, several manufacturers
Cardio, strength, flooring and accessories rarely come from one brand. We consolidate them into a single order and a single delivery date, so the room lands together.
-
Managed installation, wherever it is
Equipment is assembled, placed to the approved layout and function-tested on site by crews we manage or installers we work with — never a bare freight drop-off.
One scope, one team A layout drawn to scale before an equipment list exists, with ADA clearances, floor loading and power planned into it. Cardio, strength and functional equipment from several manufacturers, plus flooring and mirrors, consolidated into one order and one delivery date. Delivery, installation and function testing, then finance options, extended warranties and maintenance once the room is open.Design, equipment and installation as one scope
Design and layout
Equipment and flooring
Installation and after
The facilities we equip in Michigan
Home and private training rooms
The expensive surprise in a home gym is almost never the equipment — it is the floor underneath it. Fitness areas are designed for 100 psf under IBC Table 1607.1, while residential areas outside sleeping rooms get 40 psf and sleeping areas 30 psf. A garage slab or a basement is rarely a problem. A bonus room over a garage carrying a full rack and a loaded plate tree is a question worth asking before the truck arrives, because the answer occasionally moves the room. More on home gym equipment and design.
Apartment and condominium amenity rooms
An unstaffed room open around the clock is a different specification from a supervised one, and treating it as the same is where liability creeps in. With nobody present to spot a lift, correct form or clear a jam, we favor equipment that is safe to use alone and hard to misuse, and we keep the clearances genuinely clear — ADA wants a 30 by 48 in clear floor space for at least one of each type of machine, reached by a 36 in accessible route. In a staffed club an obstruction gets moved within the hour; in a resident gym it stays there until somebody complains. More on equipping apartment and condo fitness centers.
The rest of what we equip there
Those two are what Michigan orders most, not the limit of what we supply there. The same design, flooring, delivery and installation work covers every other facility type:
- student housing gyms
- HOA and property-managed gyms
- corporate fitness centers
- health clubs and training studios
- hotel and resort fitness rooms
- senior living fitness rooms
- medical and rehab training rooms
- schools and campus recreation
- fire, police and municipal gyms
- correctional facility fitness rooms
- YMCA and nonprofit gyms
What decides the room before the equipment list
Flooring is a measured property, not a finish
ASTM F2772 is the standard specification for the athletic performance properties of indoor sports floor systems, covering force reduction, vertical deformation, ball bounce and surface friction as MEASURED values. A free-weight drop area, a turf lane and a group studio ask different things of the build-up, so specifying by zone usually costs less than taking the heaviest specification across the whole room — and in multifamily and hospitality it is a noise decision as much as a durability one.
Equipment anyone can use
Inclusive use is a specification decision rather than a category added at the end. ASTM F3021 is the standard specification for universal design of fitness equipment for inclusive use by people with functional limitations and impairments, and it governs the machines themselves — step-through access, grip points, seat height — where the ADA clearances govern the space around them. In an unstaffed room, which most amenity spaces are, that distinction matters more.
Replacing a room that already exists
Most projects are not empty rooms. Where equipment is being replaced we can appraise, buy back and remove what is there, which changes the arithmetic on the new floor and removes the disposal problem — a loaded selectorized stack is not something a property manager wants to arrange a truck for. Planning the swap also matters to residents and members: a room that is out of service for an unplanned week is the complaint that follows the project around.
In short
Commercial fitness facilities in Michigan have been designed, supplied and installed by Fit Supply. Work there runs to home and individual customers, apartment and condominium communities, schools and campus recreation. Fitness areas are designed for a 100 psf live load under IBC Table 1607.1, against 40 psf for ordinary residential space — which decides what an upper floor can hold.
Common questions about Michigan projects
Does Fit Supply work in Michigan?
Yes. We have supplied and installed commercial fitness facilities in Michigan. Facilities in surrounding communities are served from the same projects, so it is worth asking even if your market is not named. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
Can my upstairs room take a home gym?
It depends on the framing, and it is worth checking. IBC Table 1607.1 designs fitness areas for a 100 psf live load against 40 psf for residential areas outside sleeping rooms. Ground-floor slab is rarely a concern; a room over a garage carrying a rack and loaded plate tree deserves an engineer’s opinion first. We can plan the heavy items over bearing walls where that helps.
Why does our amenity room feel cramped with only a few machines?
Almost always circulation rather than piece count. ADA requires a 60 in diameter turning space and a 36 in minimum clear route width, and in a small room those consume more of the floor than people expect. A layout drawn to scale shows it immediately, which is why we draw before quoting.
What are the lead times on commercial gym equipment?
Anywhere from in stock to roughly six months, depending entirely on what is ordered. Most cardio and most stock strength runs about two weeks. Accessories and HIIT products are typically one to two weeks. Custom strength is the long pole: custom colors, a different paint process or bespoke upholstery generally runs six to twelve weeks, and fully custom lines such as Atlantis, Gym80 or Panetta can reach six months. Lead time is the thing most likely to move your opening date, so it is worth settling early.
Can I cancel or return equipment after I order it?
It depends what it is. Custom and modified products cannot be cancelled, returned, rescheduled or refused, and they require full payment up front. Standard stock products can be returned only with our prior written authorization, in new and resalable condition in the original packaging, at your expense and risk, and are subject to a 25% restocking charge. After a proposal is executed, cancellation carries a 25% fee of the proposal total. This is why we would rather spend the extra day on the layout than have you order twice.