Our Work
Louisiana Fitness Centers
- 2007designing and equipping fitness facilities since
- 30,000+commercial orders delivered
- 500+cities served
- 50+manufacturer partners
Installed in Louisiana
8 photos
Commercial Fitness Facilities We Have Equipped in Louisiana
Projects here run the same way they do anywhere: the room is measured and drawn to scale first, the equipment list follows from the layout, and delivery and installation are managed rather than left as a freight drop-off. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
On the Install
5 photos
Markets we have equipped in Louisiana
Baton Rouge, Hammond, Shreveport, Covington, Youngsville, Cut Off, Lake Charles, Vivian and Geismar. Facilities in the communities around them are served from the same projects, so it is worth asking even if your market is not named here.
Louisiana is one of the 8 states where Fit Supply holds the sole gym80 dealership. See the gym80 lines available here.
How a project runs, from drawing to installed room
-
The room is drawn before it is quoted
A layout to scale comes first, with ADA clearances, floor loading and power planned into it. Most of the work here is in corporate wellness centers, health clubs and gyms, and the equipment list follows from the room rather than the other way round.
-
One order, several manufacturers
Cardio, strength, flooring and accessories rarely come from one brand. We consolidate them into a single order and a single delivery date, so the room lands together.
-
Managed installation, wherever it is
Equipment is assembled, placed to the approved layout and function-tested on site by crews we manage or installers we work with — never a bare freight drop-off.
One scope, one team A layout drawn to scale before an equipment list exists, with ADA clearances, floor loading and power planned into it. Cardio, strength and functional equipment from several manufacturers, plus flooring and mirrors, consolidated into one order and one delivery date. Delivery, installation and function testing, then finance options, extended warranties and maintenance once the room is open.Design, equipment and installation as one scope
Design and layout
Equipment and flooring
Installation and after
The facilities we equip in Louisiana
Corporate fitness centers
A corporate fitness center is nearly always carved out of space designed for something else, which makes the live load the first question rather than a late one. IBC Table 1607.1 designs fitness areas for 100 psf — a change of use against most existing office floor and a question for the building’s structural engineer. The answer decides whether the heavy strength equipment sits where the plan wants it or gets moved toward a column line, and finding out during fit-out is the expensive version. More on corporate gym equipment and design.
Health clubs and training studios
Accessibility is easier to achieve than most operators expect and almost impossible to retrofit, which is the case for drawing the floor first. ADA asks for a 30 by 48 in clear floor space on at least one of each TYPE of machine, served by an accessible route — 36 by 48 in where that space is enclosed on three sides. The part that makes it workable on a dense floor is that the clear space may overlap the route and sit in the aisle behind the machine. Planned in, it costs nothing. Discovered later, it costs a piece of equipment. More on equipping health clubs and training studios.
The rest of what we equip there
Those two are what Louisiana orders most, not the limit of what we supply there. The same design, flooring, delivery and installation work covers every other facility type:
What decides the room before the equipment list
Planning the room before the equipment list
Whatever the facility type, the room sets the equipment list rather than the other way round. ACSM allows 25 to 50 sq ft per station on the fitness floor, and ADA requires at least one of each TYPE of exercise machine to have a 30 by 48 in clear floor space served by an accessible route — 36 by 48 in where that space is enclosed on three sides. Drawn to scale, those two figures usually settle the realistic piece count before budget enters the conversation.
Circulation, and the space nobody budgets for
Rooms fail on circulation far more often than on equipment selection. ADA sets a 60 in diameter circular turning space and a 36 in minimum clear width on the accessible route, and in a room of 400 to 600 sq ft those two dimensions decide how many machines can face which way. Reserving them on the drawing costs nothing; recovering them after delivery usually means sending a piece back.
New, refurbished and remanufactured
Used commercial equipment is sold in three conditions that are frequently conflated: as-is, cleaned and serviced, and fully remanufactured. Properly reconditioned commercial equipment routinely outlasts new light-commercial at a similar price, which lets a fixed budget cover more of the floor — and on a 100 psf fitness floor built for continuous duty, the frame matters more than the badge. Which condition suits a room depends on how hard it will be used and who is maintaining it; we will say which we would put in your room and why.
In short
Commercial fitness facilities in Louisiana including Baton Rouge, Hammond, Shreveport and Covington have been designed, supplied and installed by Fit Supply. Work there runs to corporate wellness centers, health clubs and gyms, apartment and condominium communities. Cardio, strength and flooring are consolidated into one order from 50+ manufacturer partners, on a single delivery date.
Common questions about Louisiana projects
Does Fit Supply work in Louisiana?
Yes. We have supplied and installed commercial fitness facilities in Louisiana, including Baton Rouge, Hammond, Shreveport, Covington and Youngsville. Facilities in surrounding communities are served from the same projects, so it is worth asking even if your market is not named. Coverage is confirmed per project, since some equipment lines carry territory arrangements.
Can we put a fitness center in existing office space?
Usually, with the structural question answered first. IBC Table 1607.1 designs fitness areas for a 100 psf live load, so converting office space is a change of use and the building’s structural engineer confirms what the floor carries. That answer often shapes the layout, since it determines where the heaviest strength equipment can sit.
How do we make the floor work for beginners and athletes together?
By specifying part of it deliberately for inclusive use rather than assuming one range of equipment serves everyone. ASTM F3021 is the standard specification for universal design of fitness equipment for inclusive use by people with functional limitations and impairments, and it is the reference for those selections. Layout does the rest, by separating the zones that need different pacing.
Are you insured, and can you install outside business hours?
Yes on both. Fit Supply is fully insured and can provide certificates of insurance for building management. We work to whatever schedule the site requires and have completed overnight and weekend installations where a facility could not close during the day.
Are you responsible for damage to floors or doorways during delivery?
No, and this is worth planning around rather than discovering. Our terms exclude liability for damage to driveways, floors, walls, doorways, landscaping and other property along the delivery and installation path, including damage from delivery vehicles, which can weigh up to 12,000 lbs. You are asked to disclose conditions likely to cause damage before delivery. In practice the fix is cheap and boring: tell us about the soft driveway, the new lobby floor or the tight turn in advance, and we will protect it, use a smaller vehicle, or price curb-side delivery instead.