Dallas–Fort Worth area
Addison Gym Design and Equipment Supply
- 2007designing and equipping fitness facilities since
- 30,000+commercial orders delivered
- 500+cities served
- 50+manufacturer partners
Installed across Texas
Design, Equipment and Installation for Addison Facilities
Addison sits inside the Dallas–Fort Worth market Fit Supply serves most closely. We plan, supply and install commercial fitness spaces here — layout and equipment selection through flooring, delivery, installation and the service plan afterward.
In Addison our projects concentrate in apartment and condominium communities, corporate wellness centers, hotels. Each carries its own constraints around supervision, liability and traffic, and the equipment package follows from those rather than from a catalog.
We manage delivery and installation across Addison and the wider Dallas–Fort Worth area. That matters more than it sounds: commercial equipment arriving on a freight truck and left on a loading dock becomes your problem to assemble, place and level. We deliver it, build it, place it and take the packaging away.
Our Dallas–Fort Worth coverage puts Farmers Branch, Carrollton and Dallas within the same service radius as Addison. For an operator running police departments across more than one of those, that means consistent equipment and one parts channel instead of a separate arrangement per site.
For Addison facilities we cover consultation and layout through to the maintenance plan, including flooring, mirrors, finance options and extended warranties. Existing equipment can be appraised and bought back rather than paid to dispose of.
Working in Addison
Most of our work in Addison is apartment and condominium communities, corporate wellness centers and hotels.
What we equip in Addison
The three categories below are the ones Addison works in most, ranked by the volume we have actually supplied there. They are not variations on one specification — the room decides the equipment, which is why we draw it before quoting it.
Apartment and condominium amenity rooms
Electrical is the item that most often turns a finished amenity room into a second construction project, because the space was never wired for it. Commercial treadmills need a dedicated 120V, 20-amp branch circuit each, with a non-looped neutral and ground — three treadmills is three circuits, not one shared run. Doors are the companion trap: ADA sets a 32 in minimum clear opening measured with the door open 90 degrees, and a nominal 3 ft leaf does not deliver it once the stop and hardware are counted. Both are cheap to solve while the walls are open and disruptive afterwards, so we raise them during design. More on multifamily gym design and equipment.
Corporate fitness centers
A corporate fitness center is nearly always carved out of space designed for something else, which makes the live load the first question rather than a late one. IBC Table 1607.1 designs fitness areas for 100 psf — a change of use against most existing office floor and a question for the building’s structural engineer. The answer decides whether the heavy strength equipment sits where the plan wants it or gets moved toward a column line, and finding out during fit-out is the expensive version. More on corporate wellness center design.
Hotel fitness rooms
Converting a guest room into a fitness room is a structural change before it is a design project, and the gap is larger than most owners expect. IBC Table 1607.1 designs fitness areas for 100 psf against 30 psf for sleeping areas and 40 psf for other residential areas. That jump from 30 to 100 is the whole question, it belongs to the structural engineer rather than the FF&E schedule, and it matters most on an upper floor — which is exactly where the spare room usually is. More on hotel fitness room design.
Service, Repairs and Preventive Maintenance in Addison
Fit Supply provides equipment service, repairs, and preventive maintenance across Texas — delivered directly by Fit Supply or through our sister company, On Site Fitness Service. Addison is in Fit Supply's home market, minutes from our Irving office.
Coverage in Addison
Addison is part of our service coverage in Dallas–Fort Worth, alongside Farmers Branch and Carrollton. We dispatch there for repairs, warranty work and preventive maintenance the same as anywhere else in the coverage area.
Preventive maintenance plans
Preventive maintenance is offered in three tiers — Silver, Gold and Platinum — see the full PM tier structure. Every repair and PM visit is quoted and approved before work begins.
For the wider metro — every service we run here, and the rest of the market list — see commercial fitness equipment in Dallas.
Nearby cities we cover
We cover Farmers Branch, Carrollton and Dallas from the same team and the same stock, and publish a page for each.
In short
Fit Supply equips commercial fitness rooms in Addison, TX and throughout the Dallas–Fort Worth area, including Farmers Branch, Carrollton and Dallas. Most of our Addison work is in apartment and condominium communities, corporate wellness centers. Accessible routes through the floor are held at a 36 in minimum clear width.
Common questions about Addison projects
How many pieces of equipment will fit in our amenity room?
Fewer than a square-footage estimate suggests. ACSM allows 25 to 50 sq ft per station on the fitness floor, and that is before circulation. ADA adds a 30 by 48 in clear floor space for at least one of each type of machine, though it may overlap the accessible route and sit in the aisle behind the machine. We lay the room out to scale before quoting equipment.
Can we put a fitness center in existing office space?
Usually, with the structural question answered first. IBC Table 1607.1 designs fitness areas for a 100 psf live load, so converting office space is a change of use and the building’s structural engineer confirms what the floor carries. That answer often shapes the layout, since it determines where the heaviest strength equipment can sit.
Can we convert a guest room into a fitness room?
It is done regularly, but the live load is the first question. IBC Table 1607.1 designs sleeping areas for 30 psf and fitness areas for 100 psf, so the conversion is a change of use that the structural engineer confirms. Where the answer constrains things, layout can help by keeping the heaviest equipment near bearing lines.
When does TDLR have to be involved in a fitness project?
At an estimated construction cost of $50,000 or more. Texas Government Code chapter 469 requires the project to be registered with TDLR within 30 days of permit submission and reviewed by a Registered Accessibility Specialist, who also performs the final inspection. Because the registration window runs from the permit, it is a date worth putting on the schedule at the start rather than the end.
Do you cover properties near Addison?
Yes. Addison sits inside our coverage in Dallas–Fort Worth, and the same crews work Farmers Branch, Carrollton and Dallas. That matters most to owners with several properties in the area, who get a consistent specification across all of them rather than whatever each site was sold locally.