Xult · Magnum
Matrix Dumbbell Racks and Storage
Dumbbell, Kettlebell, Medicine Ball, Plate and Bar Storage
Storage follows the weights: flat trays for hex and multi-sided dumbbells, saddles and angled pro-style cradles for round ones, and a tree or rack sized to the plates and bars. The footprint and rated capacity of each piece are on its product page, and the free weights page shows what goes on them.
12 Products Shown
12 real products shown here, across Matrix's own Xult and Magnum lines — a representative sample, not the full catalog. Back to the Matrix hub for the other categories, or request a quote with your project's specifics.
Xult
10-Pair Dumbbell Flat Rack / MX-FLAT-DB-10
Three flat tiers that hold 10 pairs of dumbbells in 52 by 29 inches of floor, rated for 1,500 lb, with flat trays suited to hex and multi-sided dumbbells.
Xult
10-Pair Dumbbell Saddle Rack / MX-3TIER-SADDLE-10
Three tiers of saddles that hold 10 pairs of round dumbbells in place so they cannot roll, 63 inches across, 47.6 inches tall and rated for 900 lb.
Xult
A-Frame Dumbbell and Kettlebell Rack / MX-AFRAME-DBKB-08
A vertical A-frame that stores dumbbells up both sides and kettlebells at its base, in 32 by 25.5 inches of floor and rated for 440 lb.
Magnum
10-Pair Pro-Style Dumbbell Rack / MG-A510
A two-tier rack for ten pairs of pro-style dumbbells up to 150 lb, with trays angled 15 degrees to spare wrists and cradles that keep dumbbells from rolling.
Magnum
3-Tier Flat-Tray Dumbbell Rack / MG-A538
Three flat trays, 91 inches long, for hex-head dumbbells up to 115 lb, rated for 3,150 lb in all; a 73-inch version is also built.
Magnum
10-Pair Studio Pro-Style Dumbbell Rack / MG-A541
Ten pairs of 5 to 50 lb pro-style dumbbells on three tiers angled 15 degrees, in less floor space than a traditional 10-pair two-tier rack, rated for 2,550 lb.
Xult
Kettlebell Rack / MX-KB-RACK
A two-tier rack that keeps a full run of kettlebells off the floor and within reach, 54 inches across, 31.7 inches tall and rated for 900 lb.
Xult
10-Ball Med Ball Rack / MX-MEDBALL-RACK-10
A vertical rack that stores 10 medicine balls, two to a level, in a 22.6 by 11.2 inch footprint, standing 52.5 inches tall and rated for 198 lb.
Xult
Group X Plate and Bar Rack / MX-STUDIO-RACK
A group-exercise class's barbells and plates in one 72-inch frame, the bars standing at the center and the plates hung either side, rated for 440 lb.
Magnum
Olympic Weight Tree / MG-A94
An Olympic weight tree with 9 chrome-plated horns, set so the heaviest plates sit higher off the floor and are easier to lift off and put back, rated for 570 lb.
Magnum
Barbell Rack / MG-A98
An upright rack that holds 10 fixed barbells, five per side, on chromed holders with a lasting commercial finish, rated for 650 lb overall and 110 lb per shelf.
Magnum
Accessory Rack / MG-A97
One place for bars, grips and straps: a chromed holder for 5 bars, 5 accessory posts for grips and straps, and a top shelf, rated for 220 lb in all.
In short
Matrix storage is sized to what a room keeps: 10-pair dumbbell racks in flat-tray, saddle and angled pro-style layouts, an A-frame that holds dumbbells and kettlebells in 32 by 25.5 inches, kettlebell and medicine-ball racks, and racks and trees for Olympic plates, barbells and attachments. Rated capacities run up to 3,150 lb, on the 3-tier Magnum flat-tray rack.
Matrix Storage — questions
Is this the complete Matrix Storage range?
No — a representative sample of Matrix's Xult and Magnum storage, chosen to cover dumbbells, kettlebells, medicine balls, plates and bars; the Xult Studio Dumbbell Rack is shown under Strength. Matrix publishes more, including 2-tier and studio flat-tray dumbbell racks, horizontal plate racks and stability-ball racks; ask for the complete line sheet when you request a quote.
Can Matrix Storage be mixed with other brands, or other Matrix categories?
Yes to both. Matrix Storage pairs easily with Matrix's own other categories, or with any of the other manufacturers Fit Supply carries — the mix is built around what the room needs.
Should dumbbells go on a flat-tray rack or a saddle rack?
It follows the dumbbell. Matrix's flat trays are made for hex-head and multi-sided dumbbells, whose shape keeps them from rolling, while saddle and pro-style racks cradle round dumbbells in place; the pro-style racks also angle each tray 15 degrees to spare wrists.